Enclosed Cameras

ESD  Pixelink enclosed cameras are not ESD sensitive and can be handled without ESD protection.

Water & Dust – The enclosures are not water or dust proof. If used in harsh environments, the camera should be protected within an appropriate enclosure.


Do not open camera housing


Housing: Clean the housing with a cloth dampened (not dripping) with reagent-grade isopropyl alcohol.


  • Carefully apply puffs of dry, compressed air to move particles off the center of the glass.

  • Remove oils with a swab moistened with reagent-grade isopropyl alcohol. The swab should be damp but not dripping.

  • For more information, see: Camera and sensor glass cleaning instructions



Do not use acetone to clean the glass


Board Level Cameras

ESD  The board level imaging modules are ESD sensitive and should only be handled by using proper ESD procedures. Refer to ANSI/ESD S20.20 Class Type 3 (4000 V).