Pixelink Knowledge Base

Accessories

Accessories

PL-B Trigger accessory with straight connector and unterminated cable
Description The Trigger Accessory with blunt-cut wire is a connector with a 2 meter wire that can be used to interface to trigger and control equipment wh...
Fri, 24 May, 2019 at 3:59 PM
PL-B Trigger accessory with right-angle and unterminated cable
Description The Trigger Accessory with blunt-cut wire is a connector with a 2 meter wire that can be used to interface to trigger and control equipment whe...
Fri, 24 May, 2019 at 4:21 PM
PL-B Trigger accessory with optical switch
Description The Trigger Accessory is an optically activated trigger designed for use with the PixeLINK PL-B Machine Vision Cameras.  It consists of a sl...
Fri, 24 May, 2019 at 3:20 PM
PL-D 2M-TRCABLE UNTERMINATED
Description The Trigger Cable Accessory Unterminated is an 8-pin Hirose HR25A-7P-8P cable plug connector pre-wired to a 2 meter cable which can be used ...
Fri, 24 May, 2019 at 2:40 PM
Maximum suggested IEEE-1394 cable lengths
The IEEE-1394 standard specifies the following maximum cable lengths: Bus Type Cable Type Max Length Speed Limitations 1394a 4-pin or 6-pin shielde...
Fri, 24 May, 2019 at 2:45 PM