With our 8.X release you will need to update the firmware on the camera, if you do not update the camera you will receive an error when starting Capture OEM...

Windows 10: The option can be found under Control Panel > Windows Defender Firewall > Allow an App Through Windows Firewall Click the check bo...

For GigE cameras, the program will not be able to stream the camera using ‘Jumbo Packets’, even if your Network card has Jumbo Packets enabled.  This will r...

Cat5e can be used, but Cat 6 is recommended.

Open the Network Connection dialog: Open the context menu on a Server Adapter Connection and select Properties: Select configure and then select the T...

Question: When I run a program that interacts with a Pixelink GEV camera, I get prompted by a Windows Security Alert , indicating that the ‘Windows Firewal...

In order to set up your Network card when a GigE camera is directly connected, you must manually set the IP address of the NIC card and then the camera.  Th...

Normally, it is possible to operate multiple GigE Vision cameras simultaneously on a single network adaptor by using a Gigabit Ethernet switch. However, it ...